Friday, September 5, 2014
Browse »
home»
1
»
2
»
4
»
advance
»
galaxy
»
jb
»
s
»
samsung
»
to
»
Samsung Galaxy S Advance to JB to 4 1 2
Samsung Galaxy S Advance to JB to 4 1 2
IF ANY JELLYBEAN UPDATE IS ALREADY AVAILABLE FOR YOUR HANDSET SO DONT TRY THIS BECAUSE THIS IS ONLY AVILABLE FOR INDIAN VERSION PHONES.
1.Download the android 4.1.2 jellybean CUSTOM ROM and Extract it.
2.Download Odin for windows from HERE.
3.Install Samsung USB Drivers Windows 64 Bit from Here.
4.Turn off your galaxy s advance and reboot in download mode by pressing HOME BUTTON + POWER BUTTON + VOLUME DOWN BUTTON at the same time.
5.The device will reboot in download mode and you will see a warning to install Custom ROMS.Press Volume Up button to Continue and do not switch it off.
6.Now Open Odin on your PC and connect your phone to PC via Orignal USB Cable.
7. When you connect the phone in download mode to Odin then the field under the "ID:COM" in Odin will turn blue and show you the Connection ID. Also in Message Box you will see " Added!!" .This means that your Galaxy S Advance I9070 is now ready for Flashing into Android JELLYBEAN 4.1.2.
8. Now put a check in front of "PDA" then click "PDA"in Odin and Browse the EXTRACTED Android Jellybean 4.1.2 ROM File [.tar.md5 File] which you have downloaded. [Note:-It will replace the Old Rom.]
9. Now click "Start".You will see progress in the progress bar above ID:COM.
10. After completion your Galaxy S Advance will Auto Reboot and start with latest android 4.1.2 jellybean update.
After Reboot again Switch Off Your Device into Recovery Mode By pressing Volume Up Button + Home Button + Lock Button all at the Same Time.
2.The device will automatically boot in recovery mode.You can move up and down by pressing Volume Up and Down buttons. Now select “wipe data/factory reset”. 3. The device will be wiped and factory reset. Then Tap "Back Key" and select “wipe cache partition”.4.After wiping cache partition go back and select “reboot system now”.
5.Now galaxy s advance will work perfectly.
2.Download Odin for windows from HERE.
3.Install Samsung USB Drivers Windows 64 Bit from Here.
4.Turn off your galaxy s advance and reboot in download mode by pressing HOME BUTTON + POWER BUTTON + VOLUME DOWN BUTTON at the same time.
5.The device will reboot in download mode and you will see a warning to install Custom ROMS.Press Volume Up button to Continue and do not switch it off.
6.Now Open Odin on your PC and connect your phone to PC via Orignal USB Cable.
7. When you connect the phone in download mode to Odin then the field under the "ID:COM" in Odin will turn blue and show you the Connection ID. Also in Message Box you will see "
8. Now put a check in front of "PDA" then click "PDA"in Odin and Browse the EXTRACTED Android Jellybean 4.1.2 ROM File [.tar.md5 File] which you have downloaded. [Note:-It will replace the Old Rom.]
9. Now click "Start".You will see progress in the progress bar above ID:COM.
10. After completion your Galaxy S Advance will Auto Reboot and start with latest android 4.1.2 jellybean update.
After Reboot again Switch Off Your Device into Recovery Mode By pressing Volume Up Button + Home Button + Lock Button all at the Same Time.
2.The device will automatically boot in recovery mode.You can move up and down by pressing Volume Up and Down buttons. Now select “wipe data/factory reset”. 3. The device will be wiped and factory reset. Then Tap "Back Key" and select “wipe cache partition”.4.After wiping cache partition go back and select “reboot system now”.
5.Now galaxy s advance will work perfectly.
If you see any other language during Android setup then change it to English.
Now you have installed Android 4.1.2 XXLQ4 jellybean update on Samasung Galaxy S Advance I9070.
Now you have installed Android 4.1.2 XXLQ4 jellybean update on Samasung Galaxy S Advance I9070.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment