Showing posts with label jumpers. Show all posts
Showing posts with label jumpers. Show all posts
Wednesday, November 19, 2014
Nokia N91 White Lcd Solution Display IC Jumpers
Problem:
- White/ Blank Display
- Its better to change Display Filtersm (IC), In Case new Ic not available, remove red marked ICs and make jumpers as shown in picture below.
Tuesday, November 18, 2014
Samsung Glaxy s2 i9100 Mic Problem Solution Jumpers
Samsung Glaxy s2 i9100 Mic Problem Solution Jumpers
Samsung Glaxy s2 i9100 Mic Problem Solution By Jumpering
Samsung Glaxy s2 i9100 Mic Problem Solved Jumper Ways
Samsung Glaxy s2 i9100 Mic Problem Solution By Jumpering
Samsung Glaxy s2 i9100 Mic Problem Solved Jumper Ways
Monday, November 17, 2014
Repair LG GM 200 Mic Not Working Problem By Jumpers
LG GM 200 Mic Not Working Problem Jumper Ways
Repair LG GM 200 Mic Not Working Problem
LG GM 200 Mic Not Working Problem Solutions
Wednesday, November 12, 2014
Nokia C2 07 Lcd Display Problem Solution Ways Jumpers
Nokia C2-07 Blank Lcd Display, Nokia C2-07 White Lcd Display, Nokia C2-07 Lcd Jack Damage Prints Missing.
To solve lcd display problem in Nokia C2-07 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-07
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-07 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
To solve lcd display problem in Nokia C2-07 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-07
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-07 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Monday, October 13, 2014
Nokia 1650 display white blue after a few second solution jumpers
Nokia 1650 display white blue after a few second solution jumpers
Tuesday, September 16, 2014
Nokia X6 Network Problem Signal Ways Jumpers fix problem
Nokia Mobile X6 with Low Signls, Network Problem, Network solution, Nokia Mobile, Signals Jumpers, Signals Problem
If X6 network problem or a low signal problem in your mobile solution you can do the following diagram with this post.look attached to the chart and you can see a few items in red
![]()
and the various colored lines of the components used in the network function in the Nokia Mobile x6.clean these components if there is no water damage or rust than enables the board to dry under electric light bulb for a few coins, so it can be dry or use low heat with hot air, you may need to change these parts, if not solve the problem with just cleaning and service process.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
If X6 network problem or a low signal problem in your mobile solution you can do the following diagram with this post.look attached to the chart and you can see a few items in red
and the various colored lines of the components used in the network function in the Nokia Mobile x6.clean these components if there is no water damage or rust than enables the board to dry under electric light bulb for a few coins, so it can be dry or use low heat with hot air, you may need to change these parts, if not solve the problem with just cleaning and service process.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
Saturday, August 30, 2014
Subscribe to:
Posts (Atom)
