My Solution

Showing posts with label for. Show all posts

Saturday, November 8, 2014

MICROPHONE REPAIRING SOLUTION FOR NOKIA 1110

MICROPHONE REPAIRING SOLUTION FOR NOKIA 1110: THE IMAGE CONTAINS NOKIA 1110 MICROPHONE HARDWARE PROBLEM SOLUTION TIPS.

Monday, October 27, 2014

Nokia X3 Not charging solution for charger no response problem

Heres a solution for Nokia X3 Not charging problem like it shows no response or indication on the display when a working battery charger is being plug-in.

If encountered charging problem on nokia X3, you may need to check the DC jack or charging pin and ensure that is perfectly cleaned, not misaligned and with properly in-tacked on the PCB contact pads.
If the charging pin assembly is perfectly fine but still it shows no indication of charging operation,
the solution below shows the components on Nokia X3 PCB board that may need to check and or replace if a charging problem occurred.

Nokia X3 Not Charging Problem Solution

The solution above shows the components such as chip fuse, diode, filter coil and capacitor which holds as a charging protection circuit. These components will breakdown or being damaged if a short circuit happened on Nokia X3 PCB board. You may need to check and replace these components if found damaged and fix nokia x3 not charging problem.

Thursday, October 2, 2014

TATA Croma CRCB2094 Android Phone with 5 3″ Display 1GB RAM

Croma Retail, a TATA Group Company has launched an Android smartphone which is dubbed as Croma CRCB2094 which comes with the 5.3 inches of Screen size along with the affordable price tag. While the incumbents in the market are already dying for getting substantial amount of market share, the launch of Android smartphones from Croma Retail is a thing to watch out for as the target audience of this line up is still in doubt. While Croma still has limited Offline stores and limited online presence, it will be a task to sell this and upcoming Android smartphones. Let’s check out in detail on what are the specs and features of this smartphone.

Specs & Features of Croma CRCB2094:
With 5.3 inch 5 touch point TFT FWVGA capacitive touchLcd, with 960 x 540p resolution, this device is powered by a 1GHz of Dual Core Processor along with the Mediatek 6577 Chipset. With 1GB of RAM, you can play virtually all the games available in the PLAY Store. This device also comes with all other basic features like 802.11 b/g/n Wi-Fi, Bluetooth v2.1, 2 MP secondary camera & micro USB slot. Last but not the least, this device also comes with the 2200mAH of Li-Po Battery which gives you a talk time of 4hrs and a standby time of up to 140 hrs. With 8MP as Rear facing camera, this device comes with the 2MP of Front Facing Camera.
Also mentioned the detailed list of features below for your convenience,

5.3 inch 5 touch point TFT FWVGA capacitive touchLcd,
Screen Resolution of 960 x 540p,
8MP of Rear Facing Camera,
1GB RAM,
2MP of Front Facing Camera,
Dual Core 1GHz of Processor,
LED back light, 802.11 b/g/n Wi-Fi, Bluetooth v2.1, microUSB,
2200Mah Battery

This Croma Android smartphone can be purchased from Croma Retail stores as well as Croma’s Online Store for Rs. 11,490. Do let us know your thoughts on the same in the comments section below.

Sunday, August 17, 2014

How To Make Free Ringtones For Your iPhone

The simple ringtone hack that was discovered almost three years back still seems to work with the latest version of iTunes.
It is based on the fact that iTunes differentiates a song file and a ringtone by the file extension. While we all know that the song file extension was AAC; the file extension for ringtones is “M4R”.
All you need to do is take an m4a file, which is DRM freeand not more than 30 seconds, rename it to m4r and add it to iTunes.

You can check out this step by step guide to create free custom ringtones for your iPhone using iTunes:

In iTunes, right click on the song you are going to make into a ringer and select “Get Info.”
Go to the options tab and go down to the “Start Time” and “Stop Time” check boxes. Check both boxes and input the time you want your ringtone to start/stop (it should not be more than 30 seconds). Click OK when you’re done.
Right click on your newly “clipped” song and select “Convert Selection to AAC.” The song will be re-encoded using the start and stop times determined (If your menu item does not read “Convert Selection to AAC” and reads “Convert Selection to MP3″ (or some other format) please go to iTunes > Preferences > Advanced > Importing and change the “Import Using” drop down menu to “AAC Encoder”).
After the song is done encoding navigate to your iTunes Music folder, locate your song, and drag it to your desktop. After the song is on your desktop go back to iTunes and delete the clipped version from you iTunes library (It won’t delete it from your desktop, it will only remove it from iTunes).
Go back the song on your desktop and right click on your song and choose “Get info.” Go to the name and extension section and change the extension from .m4a to .m4r (or you can just change the extension right from your desktop)
After the extension is changed simply double click on the file to add it to your iTunes library. It should show up under the ringtones section. Then sync your phone with iTunes.
You should now be able to change the ringtone to the new one by going to Settings –> Sounds –> Ringtone. The new ringtone should show up under “Custom”. Tap on it to set it as your default ringtone.

Please let us know how it goes and don’t forget to tell us your favorite ringtone in the comments section below.