My Solution

Jumper problem-solving ability charge charge that has not been the Samsung Galaxy S4 i9500 support

Samsung I9500 Galaxy S4 Charging Solution Jumper Problem Ways Charging Not Supported

CAUSE Case pin broken i9500 Samsung Galaxy S4 in charge issues can not be the battery power that you save the problem of flood damages.in mobile charge to charge, be due to the conditions, you will be able to see only it fake charging it.in in charge of false, but in charge might be a sign of mobile Signe of, it does not have to save all of the power.
Jumper problem-solving ability charge charge that has not been the Samsung Galaxy S4 i9500 supportvgrb
Only do not support charging, charging the problem skills in the resolution Samsung Galaxy S4 i9500 jumper of problem
Diagram.check, change the above Jesus then chager, the point if you check it out, and do not show the accourate value, they are on the charger jack and board can be charged if you are good value threshing mobile phone, which is indicated by a mother point disassamply you checks, meters are given in the figures of each segment and track field, your Samsung Galaxy S4, i9500, you may later need to perform several steps.

Damage to any rust, carbon and water, in any section in any track, applies the jumper, broken either part or corrupted, if it is subsequently lost, a new damage. carefully look at the mother of another Council will be able to replace the if.

For new tips and tricks, the details of the solution to this problem, you have to be able to read the details of the mobile phone, will have the following new updates.some related article, we update this page is visited kept there when, are given.

Each image & solutions, but to me all damage to our website, to post to one or more of our team, because it is tested by note, we include a personal injury.Use Please to not be responsible for repairing it in or damage to your own responsibility of solutions. 

Nokia C2-07 Mic not working, Microphone is not working in Nokia C2-07, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-07

Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-07 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-07
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don’t apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

Many iPhone owners expect that incoming call blocking is a built-in feature of the iPhone. Unfortunately, this is not the case. Such a feature is controlled at the provider level. Furthermore, most providers fail to offer call blocking to their customers. Providers that do often charge an exorbitant rate for this feature, such as AT&T in the US which offers a service called “Smart Limits” which includes call blocking but comes at a pricey $5 per month.

1110i Charging Problem
 
1110i Charging Problem
1110i Not Charging
1110i Charging Ways
1110i Charging Jumpers
1110i Not Charging Solution

Before I continue my post about mobile phone repair, I paste a trick to repair keyboard connectors on the motherboard laptop. Hopefully this can be useful for all readers of this blog.

Laptops have a lot in common with mobile phones, particularly in terms of connections between parts that use a very small connector so it is easily damaged. When we do the disassembly, if not careful in removing these connectors, it will cause damage to the connector. In some areas, like in my country, parts for laptops and mobile phone connector is quite difficult to find.

On this occasion, Ill share a trick to repair defective laptop keyboard connector. If you owned a laptop keyboard connector is damaged, there are only two options you can take, namely to replace the entire motherboard with a new laptop or use the external keyboard attached via USB. Why should replace the entire motherboard laptop? As I mentioned above that the spare parts for laptop keyboard connector is very hard to find or even not available in the market. But calm down, please try tricks that I share the following will, hopefully can be useful for you who have problems with your laptop keyboard.

The following figure is an example of a broken laptop keyboard connector.

In the picture above, you can see that the lock is broken at the edges (brown part). Thus, it can not lock the keyboard cable. But still, do not waste lock because we still can use it with add a little trick. How to install the broken clip? Ok, this is the steps.

Position the broken clip the way it was before. In this case, both sides of the connector are broken. Carefully insert the keyboard cable into the connector. Note, in this type of connector, the cable goes above the locking clip. Look at the picture below.

Carefully push the broken clip back in place. You can use a small screwdriver to push on the clip behind the cable. The clip fits tightly when there is a cable inside the connector.

Then, secure the connection with the sticky tape and you should be good to go. The keyboard should work just fine. Look at the picture.